Catalog -- Shredders & Recycling -- Shredders --

HSM 411.2 Professional
Product #:  HSM 411.2
Product Name:  Professional Shredder
Description:  

At the maximum security level, HS Level 6, this security expert meets all demands. Furthermore it also shreds CDs, credit cards and disks at the security levels 2 and 3.

High performance AC model for EDP departments and office floors. Can destroy entire computer listings and shred store and credit cards as well as CDs, floppy disks (details see below*) and DAT cartridges (security level 3 only). In the security levels 3 and 4 folding safety element with feeding slot. Keypad control for constant operation and reverse. Photoelectric cell for automatic start/stop control. Stops automatically when the waste bag is full and when the door is open. Convenient automatic reverse in the event of a paper jam. Modern electronic controller. Stand-by mode with LED indicator. Removable, reusable waste bag.

  • Hardened solid steel cutting rollers, unaffected by staples and paper clips
  • Powerful drive for high performance even when used for long periods of time – thermally protected motor
  • Quiet operation and low-noise running
  • Modern electronic control
  • Automatic start/stop control, especially convenient via photoelectric cell
  • Stand-by operation with LED
  • Especially suitable for computer lists Transportable on wheels
  • Cutting rollers with patented HSM V groove
With their powerful motors, the voluminous devices of the HSM PROFESSIONAL series are able to make a clean sweep of all material to be shredded even in IT departments and on entire office floors, including sensitive paper documents, computer lists and credit cards. And even CD ROMs and disks are dealt without any problems.

Pricing Information:
Unit Price: Quote
Package Type: Each
Units Per Package: 1
Product Details:
Security Level (in.):  Level 5 (particle cut)
Level 6 (particle cut)
Level 2 (strip cut)
Level 3 (particle cut)
Level 4 (particle cut)
Level 2 (strip cut)
Cutting Width:  .078 mm (particle cut)
1 mm (particle cut)
5.8 mm (strip cut)
3.9 mm (particle cut)
1.9 mm (particle cut)
3.9 mm (strip cut)
Particle Length: 11.0 mm (particle cut)
5.0 mm (particle cut)
50.0 mm (particle cut)
15.0 mm (particle cut)
Cutting capacity (70 g/m2):  17-19 (particle cut)
9-10 (particle cut)
65-67 (strip cut)
38-40 (particle cut)
26-28 (particle cut)
48-50 (strip cut)
Cutting Capacity (80 g/m2):  12-14 (particle cut)
7-8 (particle cut)
51-53 (strip cut)
33-35 (particle cut)
20-22 (particle cut)
38-40 (strip cut)
Intake Width:  400 mm
Container volume / Collecting container:   1461
Cutting Speed:  110 mm/s (particle cuts)
100 mm/s (strip cuts)
Power consumption of the motor: 2100 W
Voltage / Frequency: 120 V / 60 Hz
Dimensions W x H x D : 595 mm x 960 mm x 470 mm
Weight (kg.):  80 kg (particle cuts)
70 kg (strip cuts)
Trade Name Type: Registered Trademark
Trade Name: HSM
Minimum Order Quantity: 1
Home -- Site Map -- Contact Us -- About Us