Catalog -- Shredders & Recycling -- Shredders --

HSM 225.2 Office
Product #:  HSM 225.2
Product Name:  Office Shredder
Description:  

The most powerful model of the OFFICE series is a perfect central device for large offices that can also shred credit cards without any difficulty. Depending on the cutting variation, the HSM 225.2 also shreds CDs and disks.

Mobile, very high performance model for use as a shared device in large offices. Shreds store cards, credit cards with ease as well as CDs and floppy disks (details see below*). Modern electronic controller. Photoelectric cell for automatic start/stop control. On/off switch with integrated reversing function. Folding safety element, in the security levels 2 and 3 with infeed slot for CDs and floppy disks. Stand-by mode with LED indicator. Stops automatically when the container is full and when the door is open. Automatic stop with LED plus auto-reverse in the event of a paper jam. Waste container with reusable collecting bag.

  • Designed specially for continuous operation
  • Hardened solid steel cutting rollers, unaffected by staples and paper clips
  • Powerful drive for high performance even when used for long periods of time – thermally protected motor
  • Tried-and-tested closed gear transmission prevents dirt and wear, thus increasing the service life
  • Closed housing provides protection against paper dust
  • Rocker switch for on/off and reverse
  • Cutting rollers with patented HSM V groove
  • Automatic control via photoelectric cell (from HSM 105.2)

At the various security levels in accordance with DIN 32757-1 and HSM’s own level, HS Level 6, the devices of the HSM OFFICE series are designed specifically for use at the desk or as central devices for large offices. Ideally technically equipped, our OFFICE models ensure a permanent high capacity. The large OFFICE machines not only shred paper, but also CDs.

Pricing Information:
Unit Price: Quote
Package Type: Each
Units Per Package: 1
Product Details:
Security Level (in.):  Level 6 (particle cut)
Level 3 (particle cut)
Level 4 (particle cut)
Level 2 (strip cut)
Level 2 (strip cut)
Level 5 (particle cut)
Cutting Width:  1 mm (particle cut)
3.9 mm (particle cut)
1.9 mm (particle cut)
5.8 mm (strip cut)
3.9 mm (strip cut)
0.78 mm (particle cut)
Particle Length: 5.0 mm (particle cut)
40.0 mm (particle cut)
15 mm (particle cut)
11 mm (particle cut)
Cutting capacity (70 g/m2):  7-8 (particle cut)
25-27 (particle cut)
17-19 (particle cut)
40-42 (strip cut)
31-33 (strip cut) 10-11 (particle cut)
Cutting Capacity (80 g/m2):  6-7 (strip cut)
20-22 (particle cut)
12-14 (particle cut)
32-33 (strip cut)
25-27 (strip cut) 7-9 (particle cut)
Intake Width:  300 mm
Container volume / Collecting container:   1051
Cutting Speed:  135 mm/s (particle cuts)
126 mm/s (strip cuts)
Power consumption of the motor: 1400 W
Voltage / Frequency: 120 V / 60 Hz
Dimensions W x H x D : 500 mm x 895 mm x 420 mm
Weight (kg.):  48 kg (strip cuts)
42 kg (particle cuts)
Trade Name Type: Registered Trademark
Trade Name: HSM
Minimum Order Quantity: 1
Home -- Site Map -- Contact Us -- About Us