Catalog -- Shredders & Recycling -- Shredders --

HSM 125.2 Office
Product #:  HSM 125.2
Product Name:  Office Shredder
Description:  

This professional data security model is the perfect central device for larger offices. Besides paper and credit cards, the 125.2 also shreds CDs with ease.

Mobile, high performance model for use as a shared device in busy offices. Shreds store cards, credit cards and also CDs as well as floppy disks (details see below*). Modern electronic controller. Photoelectric cell for automatic start/stop control. On/off switch with integrated reversing function. Safety element above paper intake, with infeed slot for CDs/floppy disks in security level 2. Stand-by mode with LED indicator. Stops automatically when the container is full and door is open. Automatic reverse in security level 5 and HS Level 6. Waste container with reusable collecting bag.

  • Designed specially for continuous operation
  • Hardened solid steel cutting rollers, unaffected by staples and paper clips
  • Powerful drive for high performance even when used for long periods of time – thermally protected motor
  • Tried-and-tested closed gear transmission prevents dirt and wear, thus increasing the service life
  • Closed housing provides protection against paper dust
  • Rocker switch for on/off and reverse
  • Cutting rollers with patented HSM V groove
  • Automatic control via photoelectric cell (from HSM 105.2)

At the various security levels in accordance with DIN 32757-1 and HSM’s own level, HS Level 6, the devices of the HSM OFFICE series are designed specifically for use at the desk or as central devices for large offices. Ideally technically equipped, our OFFICE models ensure a permanent high capacity. The large OFFICE machines not only shred paper, but also CDs.

Pricing Information:
Unit Price: Quote
Package Type: Each
Units Per Package: 1
Product Details:
Security Level (in.):  Level 2 (strip cut)
Level 3 (particle cut)
Level 5 (particle cut)
Level 2 (strip cut)
\ Level 4 (particle cut)
Level 6 (particle cut)
Cutting Width:  3.9 mm (strip cut)
3.9 mm (particle cut)
0.78 mm (particle cut)
5.8 mm (strip cut)
1.9 mm (particle cut)
1 mm (particle cut)
Particle Length: 30.0 mm (particle cut)
11.0 mm (particle cut)
15 mm (particle cut)
5.0 mm (particle cut)
Cutting capacity (70 g/m2):  23-25 (strip cut)
16-18 (particle cut)
7-8 (particle cut)
28-30 (strip cut)
12-14 (particle cut) 4-5 (particle cut)
Cutting Capacity (80 g/m2):  18-20 (strip cut)
12-14 (particle cut)
6-7 (particle cut)
22-24 (strip cut)
9-11 (particle cut) 3-4 (particle cut)
Intake Width:  255 mm
Container volume / Collecting container:   761
Cutting Speed:  130 mm/s (particle cuts)
120 mm/s (strip cuts)
Power consumption of the motor: 670 W
Voltage / Frequency: 120 V / 60 Hz
Dimensions W x H x D : 448 mm x 828 mm x 347 mm
Weight (kg.):  26 kg (strip cuts)
30 kg (particle cuts)
Trade Name Type: Registered Trademark
Trade Name: HSM
Minimum Order Quantity: 1
Home -- Site Map -- Contact Us -- About Us