Catalog -- Shredders & Recycling -- Shredders --

HSM 108.2 Office
Product #:  HSM 108.2
Product Name:  Office Shredder
Description:  

With its powerful motor, the 108.2 is ideal for busy offices. It even shreds credit cards.

Mobile, entry-level model for use in busy offices. Shreds credit cards and store cards with ease (details see below*). Modern electronic controller. Photoelectric cell for automatic start/stop control. On/off switch with integrated reversing function. Safety element above paper intake. Stand-by mode with LED indicator. Stops automatically when the container is full and door is open, with LED indicator. Waste container with reusable collecting bag.

  • Designed specially for continuous operation
  • Hardened solid steel cutting rollers, unaffected by staples and paper clips
  • Powerful drive for high performance even when used for long periods of time – thermally protected motor
  • Tried-and-tested closed gear transmission prevents dirt and wear, thus increasing the service life
  • Closed housing provides protection against paper dust
  • Rocker switch for on/off and reverse
  • Cutting rollers with patented HSM V groove
  • Automatic control via photoelectric cell (from HSM 105.2)

At the various security levels in accordance with DIN 32757-1 and HSM’s own level, HS Level 6, the devices of the HSM OFFICE series are designed specifically for use at the desk or as central devices for large offices. Ideally technically equipped, our OFFICE models ensure a permanent high capacity. The large OFFICE machines not only shred paper, but also CDs.

Pricing Information:
Unit Price: Quote
Package Type: Each
Units Per Package: 1
Product Details:
Security Level (in.):  Level 2 (strip cut)
Level 3 (particle cut)
Level 3 (strip cut)
Level4 (particle cut)
Cutting Width:  5.8 mm (strip cut)
3.9 mm (particle cut)
3.9 mm (strip cut)
1.9 mm (particle cut)
Particle Length: 30.0 mm (particle cut)
15.0 mm (particle cut)
Cutting capacity (70 g/m2:  22-24 (strip cut)
12-14 (particle cut)
16-18 (strip cut)
9-11 (particle cut)
Cutting Capacity (80 g/m2:  17-19 (strip cut)
9-11 (particle cut)
13-15 (strip cut)
7-9 (particle cut)
Intake Width:  240 mm
Container volume / Collecting container:   481
Cutting Speed:  90 mm/s (particle cuts)
80 mm/s (strip cuts)
Power consumption of the motor: 440 W
Voltage / Frequency: 110-230 V / 50-60 Hz
Dimensions W x H x D : 401 mm x 727 mm x 272 mm
Weight (kg.):  19 kg (strip cuts)
20 kg (particle cuts)
Trade Name Type: Registered Trademark
Trade Name: HSM
Minimum Order Quantity: 1
Home -- Site Map -- Contact Us -- About Us