Catalog -- Shredders & Recycling -- Shredders --

HSM 104.3 Office
Product #:  HSM 104.3
Product Name:  Office Shredder
Description:  

Highly efficient under the desk, also suitable for shredding credit cards.

High performance model for deskside use, for constant workloads. Also suitable for shredding credit cards and store cards (details see below*). With automatic start/stop function. Stand-by operation without power consumption. On/off switch with integrated reversing function. Stops automatically when the waste container is full or has been removed. Filling level display through inspection window. Removable waste container.

  • Designed specially for continuous operation
  • Hardened solid steel cutting rollers, unaffected by staples and paper clips
  • Powerful drive for high performance even when used for long periods of time – thermally protected motor
  • Tried-and-tested closed gear transmission prevents dirt and wear, thus increasing the service life
  • Closed housing provides protection against paper dust
  • Rocker switch for on/off and reverse
  • Cutting rollers with patented HSM V groove
  • Automatic control via photoelectric cell (from HSM 105.2)

At the various security levels in accordance with DIN 32757-1 and HSM’s own level, HS Level 6, the devices of the HSM OFFICE series are designed specifically for use at the desk or as central devices for large offices. Ideally technically equipped, our OFFICE models ensure a permanent high capacity. The large OFFICE machines not only shred paper, but also CDs.

Pricing Information:
Unit Price: Quote
Package Type: Each
Units Per Package: 1
Product Details:
Security Level (in.):  Level 4 (particle cut)
Level 2 (strip cut)
Level 3 (particle cut)
Level 2 (strip cut)
Level 3 (strip cut)
Cutting Width: 1.9 mm (particle cut)
3.9 mm (strip cut)
3.9 mm (particle cut)
5.8 mm (strip cut)
1.9 (strip cut)
Particle Length: 15.0 mm (particle cut)
30.0 (particle cut)
Cutting capacity (70 g/m2:  9-11 (particle cut)
16-18 (strip cut)
12-14 (particle cut)
22-24 (strip cut)
12-14 (strip cut)
Cutting Capacity (80 g/m2:  7-9 (particle cut)
13-15 (strip cut)
9-11 (particle cut)
17-19 (strip cut)
9-11 (strip cut)
Intake Width:  240 mm
Container volume / Collecting container:   331
Cutting Speed:  90 mm/s (particle cuts)
80 mm/s (strip cuts)
Power consumption of the motor: 440 W
Voltage / Frequency: 110 V / 60 Hz
Dimensions W x H x D : 375 mm x 583 mm x 281 mm
Weight (kg.):  11.5 kg (strip cuts)
12.5 kg (particle cuts)
Trade Name Type: Registered Trademark
Trade Name: HSM
Minimum Order Quantity: 1
Home -- Site Map -- Contact Us -- About Us